Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : Where is the OBD port located on the Mercedes Class B W246?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 2, W246 - Years 2011-2019
Part: Dashboard
Operation: Where is the OBD port located on the Mercedes Class B W246?

The OBD port of your Mercedes Classe B W246 (year 2012) is hidden inside the cabin, and in the following guide, we will explain how to locate it in a few simple steps. First of all, enter the car and locate the plastic panel located at the bottom of the dashboard, below the steering wheel. Then, completely remove it with your own hands and locate the OBD port. At this point, you can connect any diagnostic device compatible with your Mercedes Classe B W246 to it.


Posted on 15 February 2024 by ScegliAuto



How do you reset the EBD of the Mercedes B-Class?
Mercedes Classe B (2011-2019 / MK 2, W246) In order to reset the EBD (Electronic Brakeforce Distribution) of the Mercedes Class B, it is necessary to connect a diagnostic tool to the OBD port
How to reset the engine light on the Mercedes B-Class W246
Mercedes Classe B (2011-2019 / MK 2, W246) In this video we will see the procedure necessary to reset the engine warning light, mainly due to a mechanical failure of the car, on the Mercedes B
How do you program the key for the Mercedes Class B?
Mercedes Classe B (2011-2019 / MK 2, W246) In order to program the key of the Mercedes Classe B, you need to insert it into the ignition lock: once inserted, you can connect a diagnostic tool

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos