Do it yourself
Frequently asked questions about cars and motorcycles

How to Put the Mercedes GL Automatic Gearbox in Neutral

Model: Mercedes Gl X164, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
This video is currently unavailable

In today's tutorial video, we will see the main steps to put the automatic gearbox of the Mercedes GL in neutral, following the instructions below. First, get inside the vehicle and turn on the ignition using the physical key; then shift the parking mode to neutral, which appears on the instrument cluster display.

At this point, use the right lever to put the vehicle in neutral, as shown in the video; this way, you can move your car in case of emergency.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Mercedes Gl (2006-2012 / X164, MK 1) In today's video tutorial, you will learn how to change the gearbox oil on the Mercedes GL by following the instructions below. First, lift the vehic…
Mercedes Gl (2006-2012 / X164, MK 1) To remove the gearbox from the Mercedes GL, lift the vehicle using a ramp to access the components under the engine bay. Unscrew all the bolts securi…
Mercedes Gl (2006-2012 / X164, MK 1) Follow these simple steps to remove and replace the starter motor on a Mercedes GL and ML 550. First, lift the car as the starter motor is located un…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos