Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlights from the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

To remove the front headlight from the Mercedes Sprinter W906, as shown in the video, the first step is to turn the ignition key to 0 and open the bonnet. Remove the front cover where the logo is located.

Extract the two side plastic clips. Using a T-key, complete the disassembly of the front bodywork.

Unscrew the two screws holding the headlight in place, gently pull it out, and disconnect the connector. Place the headlight on a surface where you have previously laid a piece of cloth to protect it from scratches, and proceed to remove the individual bulbs by releasing the clips.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to remove the front headlamp of the Mercedes Sprinter?
How to remove the front headlamp of the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) To remove the front headlamp of the Mercedes Sprinter, open the bonnet to access the screws that secure the grille; once this is released, you can co…
Where are the Fuses Located in the Mercedes Sprinter?
Where are the Fuses Located in the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) Each fuse in the Mercedes Sprinter is located within the designated fuse boxes installed in the vehicle: there are two boxes in this type of vehicle.…
Where Are the Fuses on the Mercedes Sprinter?
Where Are the Fuses on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) On the Mercedes Sprinter, the fuses are located inside dedicated fuse boxes on the vehicle. There are two boxes in this type of vehicle. The first is…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos