Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Front bumper

Removing the front bumper from your Mercedes A-Class W176 is not difficult, but it requires patience and attention. Before you start, make sure to turn off the engine. Next, lift the car with a hydraulic jack and remove both front wheels. Once that is done, remove all the screws holding the plastic cover at the bottom of the engine bay and take off the entire component. At this point, locate the two electrical connectors on both sides and disconnect them. Then, go back to the engine bay, remove the rubber sleeve, and unscrew all the screws securing the bumper. Finally, pull the bumper towards you, and you're done.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Bumper on Mercedes A-Class W176
Removing Front Bumper on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …
Replacing the Headlight Bulb on the Mercedes A-Class W176
Replacing the Headlight Bulb on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. and replace the headlight bulb on the Mercedes A-Class W176, third generation. First, open the hood of your car and start by unscrewing the fastening.. …
How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) This guide will show you how to remove and replace the front bumper grille on a Mercedes-Benz A-Class, following the instructions below. First, open …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos