Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Mercedes A-Class?

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front bumper on a Mercedes A-Class, a very simple and quick operation. For this, you will need a T25 Torx wrench, an 8mm socket wrench, and a 10mm socket wrench.

First, open the hood, then remove all the plastic rivets and unscrew the various bolts located inside the wheel wells. Continue by unscrewing the bolts on the lower edge of the bumper, unscrew the upper ones, and, holding it from one of the two ends, separate the bumper from the frame.

To install the replacement, simply follow the reverse procedure.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. the front bumper grille on a Mercedes-Benz A-Class, following the instructions below. First, open the hood of the vehicle and start removing the front.. …
Removing Front Bumper on Mercedes A-Class W176
Removing Front Bumper on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos