Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of the Mercedes A-Class?

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Front bumper

To remove the front bumper of the Mercedes A-Class, open the hood to access the screws that secure the piece from the top; once all these screws are loosened, proceed to loosen the screws located inside the wheel wells of the front wheels. When these are also loosened, you can unscrew those located at the central bottom of the bumper itself, allowing it to be detached. Once the old bumper is removed, you can install the new one, securing it properly.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2012-2018 / W176) .. the front bumper grille on a Mercedes-Benz A-Class, following the instructions below. First, open the hood of the vehicle and start removing the front.. …
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …
Mercedes Classe A (2012-2018 / W176) Replace the front bumper if damaged. Here’s how to remove it from the front of the Mercedes. Lift the hood and secure it. Raise the car on a jack. Us…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos