Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Front Bumper of the A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Front bumper

See other generations:
Video tutorial

Remove the front bumper of the car? Let's see how to remove the front bumper of the Mercedes A-Class. Lift the hood and secure it. Use a plastic or metal pry tool to remove the retaining clips located at the top of the bumper.

Once the clips at the top are removed, unscrew the clips from the splash guards and the retaining screws. Unscrew the retaining screws under the bumper and the screws inside the front grille.

Remove the bumper from the vehicle body by hand and disconnect the electrical connectors. To proceed with the installation: position the bumper on the vehicle body by hand and tighten all the screws around the splash guards both above and below.

Connect the electrical connectors.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
How to Remove the Front Bumper of the Mercedes A-Class?
How to Remove the Front Bumper of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To remove the front bumper on the Mercedes A-Class, open the hood to access the screws securing the bumper from the top. Once all these screws are.. …
Removing Front Bumper on Mercedes A-Class W176
Removing Front Bumper on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos