Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Front bumper

In this video tutorial, you will learn how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located under the bumper and the retaining clips found on both sides of the fenders. At this point, disconnect the electrical connector for the bumper and remove the upper screws. Then, gently unclip the bumper, disconnecting the sensor. Follow the video to the end for the complete removal of the front bumper!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Mercedes A-Class W176
Replacing the Headlight Bulb on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. and replace the headlight bulb on the Mercedes A-Class W176, third generation. First, open the hood of your car and start by unscrewing the fastening.. …
How to Remove the Front Bumper of the Mercedes A-Class W176
How to Remove the Front Bumper of the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. Removing the front bumper from your Mercedes A-Class W176 is not difficult, but it requires patience and attention. Before you start, make sure to turn.. …
Remove Front Bumper on Mercedes A-Class 180
Remove Front Bumper on Mercedes A-Class 180
Mercedes Classe A (2012-2018 / W176) Replace the front bumper if damaged. Here’s how to remove it from the front of the Mercedes. Lift the hood and secure it. Raise the car on a jack. Us…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos