Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Front bumper

See other generations:
This video is currently unavailable

To remove the front bumper on the Mercedes A-Class, open the hood to access the screws securing the bumper from the top. Once all these screws are completely loosened, proceed to loosen the screws located in the wheel wells of the front wheels. After these are loosened, remove the rivets found at the bottom of the bumper.

Now you can completely detach the bumper from its position, insert the new piece, and ensure everything is secured.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. you begin, open the trunk of your Mercedes A-Class. Start by removing the covers from the bolts that secure the bumper. Once done, proceed to unscrew.. …
Removing Front Bumper on Mercedes A-Class W176
Removing Front Bumper on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. how to remove the front bumper from a Mercedes A-Class W176. First, open the hood and disconnect the two battery terminals. Next, remove the screws located.. …
How to Remove the Rear Bumper of the Mercedes A-Class?
How to Remove the Rear Bumper of the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To remove the rear bumper of the Mercedes A-Class, open the trunk to access the screws that secure the bumper from the top. These screws will be.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos