Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper of the Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of the Mercedes A-Class, open the trunk to access the screws that secure the bumper from the top. These screws will be covered by plastic caps. Once you remove these screws, loosen the screws located inside the rear wheel wells to detach the bumper.

Before fully removing it, disconnect the connectors for the parking sensors. At this point, you can reposition the bumper, securing it with the appropriate screws and reconnecting the parking sensor connectors.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2004-2012 / W169) .. remove the rear bumper from the Mercedes-Benz A-Class, you need to unscrew the screws located inside the wheel wells of the rear wheels so that they.. …
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
Mercedes Classe A (2012-2018 / W176) .. and replace the rear bumper on a Mercedes A-Class. First, open the trunk lid and start removing the cargo area floor; inside, you will find the bumper.. …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos