Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from the Mercedes-Benz A-Class?

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Rear bumper

To remove the rear bumper from the Mercedes-Benz A-Class, you need to unscrew the screws located inside the wheel wells of the rear wheels so that they can be removed. Next, you will need to unscrew the screws located at the bottom of the bumper, removing them completely. The last screws to loosen will be found at the top of the bumper, just below the tailgate seal; once these are unscrewed, you will be able to completely detach the bumper and replace it with a new one.

Updated on 17 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
How to Remove and Replace the Rear Bumper on Mercedes A-Class
How to Remove and Replace the Rear Bumper on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the rear bumper on a Mercedes A-Class. First, open the trunk lid and start removing the cargo area floor; inside, you will find the bumper.. …
How do you remove the rear bumper of the Mercedes A-Class?
How do you remove the rear bumper of the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. to remove the rear bumper of the Mercedes A-Class, you need to open the rear hatch of the car so that you can access the screws that secure the bumper.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos