Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Parking Sensors in a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Parking sensors

In this tutorial, you will see how to replace the front parking sensors in a Mercedes E-Class, a very simple operation. First, lift the front of the car with a jack, taking all necessary safety precautions, then remove the wheels, extract the indicated plastic rivets, and unscrew the various bolts with a 10mm wrench. Next, separate the inner fender panel, locate the sensor in question, and remove it from the housing by pulling it outward. At this point, simply disconnect the connector, install the replacement by following the reverse procedure, and repeat the operation for the opposite side if necessary.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Parking Sensors on a Mercedes E-Class
How to Reset the Parking Sensors on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the parking sensor control unit on a Mercedes E-Class; this procedure is performed when the parking sensors are stuck or not functioning. The first step.. …
How to Replace the Parking Sensors on the Mercedes E-Class?
How to Replace the Parking Sensors on the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the parking sensors on the Mercedes E-Class, you need to work on the inside of the bumper, accessing from the bottom of the car. You will need.. …
How to Disable Parking Sensors on a Mercedes Benz E-Class
How to Disable Parking Sensors on a Mercedes Benz E-Class
Mercedes Classe E (2016-2023 / W213) .. disable the parking sensors on a Mercedes Benz E-Class, model W213, produced from 2016 to 2023. This operation is very simple as there is a dedicated.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos