Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Sensors on the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Parking sensors

See other generations:
Video tutorial

To replace the parking sensors on the Mercedes E-Class, you need to work on the inside of the bumper, accessing from the bottom of the car. You will need to pull the sensor out from the inside, removing it from its housing; once it is removed, disconnect the sensor from its connector.

At this point, connect the new parking sensor to the connector and insert it into the appropriate housing.

The same procedure should be performed on the other side; after the replacement, check the proper functioning of the new sensors.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Reset the Parking Sensors on a Mercedes E-Class
How to Reset the Parking Sensors on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the parking sensor control unit on a Mercedes E-Class; this procedure is performed when the parking sensors are stuck or not functioning. The first step.. …
How to Disable Parking Sensors on a Mercedes Benz E-Class
How to Disable Parking Sensors on a Mercedes Benz E-Class
Mercedes Classe E (2016-2023 / W213) .. disable the parking sensors on a Mercedes Benz E-Class, model W213, produced from 2016 to 2023. This operation is very simple as there is a dedicated.. …
How to Replace the Front Parking Sensors in a Mercedes E-Class?
How to Replace the Front Parking Sensors in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. the front parking sensors in a Mercedes E-Class, a very simple operation. First, lift the front of the car with a jack, taking all necessary safety.. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos