Do it yourself
| ||||
|
Mercedes Classe E - Video tutorial
Model: Mercedes Classe E
W212
- Years 2009-2016 In this guide, let's find out a solution to be able to reset the parking sensor control unit of the Mercedes E-Class; the procedure takes place when the parking sensors are blocked or not working. The first test to do is to disconnect the terminals of our battery, thus resetting all the control units of the car; if the problem persists it is necessary to use a diagnostic tool to be able to communicate directly with the ECU. So let's go reset the parking sensor control unit, following the video tutorial to the end!
Posted on 10 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |