Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class?

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front bumper grille on a Mercedes-Benz A-Class. This is a simple operation but requires removing the bumper itself.

Start by lifting the front of the vehicle, taking all necessary safety precautions. Next, open the hood and remove all the screws located at the top of the bumper.

Continue by removing both front wheels, then unscrew the bolts inside the wheel wells and remove the lower plastic panel. At this point, you can detach the bumper from the frame, separate the grille, and reassemble everything.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
How to Replace the Front Bumper Grille on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. replace the front bumper grille on a Mercedes-Benz A-Class, following the instructions below. First, open the hood of the vehicle and start removing.. …
How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
Guide to Replacing the Air Vents of the Mercedes A-Class
Guide to Replacing the Air Vents of the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the air vents of the Mercedes A-Class. First, get inside the vehicle and use the appropriate removal tool to pull out the air vent fixed.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos