Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Low Beam Bulb on the Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Headlight bulb

Discover the procedure to remove and replace the low beam bulb on the Mercedes A-Class. In this video, the procedure is shown with the headlight removed from the body; however, the replacement can also be done with the headlight installed. First, remove the plastic cover protecting the bulbs; disconnect the electrical connector and unclip the metal spring to remove and replace the low beam bulb with a new one of the correct type (in this case, H7 type). Optionally, replace the other bulbs as well!

Updated on 11 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. in the front headlights of a 2014 Mercedes A-Class. The replacement parts used for this maintenance task are: - ZES 2 LED low beam bulbs with active.. …
Replacing the Low Beam Bulb on a Mercedes A-Class
Replacing the Low Beam Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing the tray located above the headlight; then remove the.. …
How to Replace the Headlight Bulb on a Mercedes A-Class W176
How to Replace the Headlight Bulb on a Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. If you own a Mercedes A-Class W176 and are wondering how to replace the front headlight bulb, just follow the steps outlined.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos