|
Do it yourself
| |||
| ||||
Instructions for Replacing the Third Brake Light
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Replacing the third brake light located at the center of the rear hood requires removing the inner trim: first, remove the various push clips and unscrew the mounting screws of the plastic trim around the lock. Once the trim is removed, you can access the mounting screws of the third brake light (star type) and pull it out from its housing by disconnecting the corresponding power connector. There are springs near the mounting screws that keep the third brake light in position without vibrating: insert the new one, tighten the screws, and connect the connector, checking its operation.
Updated on 14 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
Follow these steps to remove and replace the third brake light and its bulbs on the Mercedes C-Class. First, open the trunk and lower the seats to re…
Mercedes Classe C
(2007-2013 /
W204)
Replacing the brake light bulb in the rear headlamp is very easy as you do not need to disassemble anything; open the trunk and remove the cover pane…
Mercedes Classe C
(2007-2013 /
W204)
To replace the bulb in the third brake light on a Mercedes C-Class, open the trunk lid and remove the inner trim of the trunk lid by releasing its re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to reset the tyre pressure warning light on the Toyota Yaris Hybrid?
To reset the tyre pressure warning light on the Toyota Yaris Hybrid, inflate the tyres until they reach the optimal pressure value: the recommended pressure is indicated on the sticker located on the driver's door pillar. Once inflated, navigate through the menu that appears on the instrument cluster: select the option related to tyre pressure and proceed to select the reset option. After completing the operation, you can turn off the ignition. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |