Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

See other generations:
Video tutorial

Follow these steps to remove and replace the third brake light and its bulbs on the Mercedes C-Class. First, open the trunk and lower the seats to remove the trunk panel.

Next, remove the third brake light from the inside by unscrewing the mounting screws and disconnecting the electrical connector for the bulbs, as shown in the video. At this point, remove and replace the third brake light bulbs if necessary, or replace the entire assembly.

Apply the reverse procedure for reinstallation!


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Mercedes C-Class?
How to Replace the Rear Brake Pads on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel.. …
How to Adjust the Parking Brake on a Mercedes-Benz C-Class?
How to Adjust the Parking Brake on a Mercedes-Benz C-Class?
Mercedes Classe C (2000-2007 / W203) .. To adjust the parking brake on a Mercedes-Benz C-Class, fully lift the rear seat to access the components underneath. Locate a square panel that needs.. …
How do you adjust the handbrake of the Mercedes C-Class?
How do you adjust the handbrake of the Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. The handbrake adjustment on the Mercedes C-Class can be done by loosening the screws that secure the rear seat bench to its housing: this way it.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos