Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Headlight Glass

Model: Mercedes Classe C - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Part: Headlight

See other generations:
Video tutorial

In older generation headlights, where the outer cover is made of glass, you can replace this lens since it is secured to the headlight housing with metal clips: however, it is necessary to remove the headlight itself to perform this replacement. Start by opening the hood and disconnecting the side turn signal; remove the trim piece located just below the headlight and unscrew the mounting bolts of the headlight to extract it from its housing.

At this point, unclip the metal fasteners securing the glass, remove the damaged glass, and install the new one, paying attention to the gasket and the fastening of the clips.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) Replace the damaged headlight bulbs on a Mercedes A-Class. Open the hood and secure it. Remove the front headlight using the appropriate socket wrenc…
Mercedes Classe C (2007-2013 / W204) Replace the front headlight bulbs on the Mercedes C. Let's see how to do the replacement. Lift the hood by pulling the lever located at the bottom ri…
Mercedes Classe C (2007-2013 / W204) In this video tutorial, you will learn how to remove and replace the front headlight bulb on a Mercedes Class C. First, open the hood of the vehicle …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos