Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Wireless Charger in a Mercedes GLA

Model: Mercedes Classe G W4631st - Years 1989-2018
Part: Checks and maintenance

Let's see how to install a wireless charger in a Mercedes GLA (the same procedure also applies to CLA or A-Class). First, open the armrest and remove the part in front by simply pulling it upwards. Then, do the same with the front section. Remove the storage compartment you intend to replace. You can find this part on AliExpress. The codes change frequently, so we suggest typing "wireless charger for Mercedes GLA" to find the component, which costs approximately $45. We insert it in place of the storage compartment, routing the cable downwards, which, once connected, must be plugged into the cigarette lighter socket inside the compartment. Then, put everything back into the console. Close everything in the reverse order of how you opened it. Job completed.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Mercedes G-Class?
Where are the fuses located in the Mercedes G-Class?
Mercedes Classe G (1989-2018 / W4631st) The fuses in the Mercedes G-Class are contained within specific fuse boxes installed in the vehicle: in this car model, you can find three boxes. The…
How to Replace the Remote Battery on a Mercedes G-Class?
How to Replace the Remote Battery on a Mercedes G-Class?
Mercedes Classe G (2018-2024 / W4632nd) In this tutorial, you will see how to replace the battery in the remote for a Mercedes G-Class, a very simple and quick operation. You will need a re…
How to reset the tire pressure light in the Mercedes G-Class?
How to reset the tire pressure light in the Mercedes G-Class?
Mercedes Classe G (2018-2024 / W4632nd) In this tutorial, we can see how to reset the tire pressure light in the Mercedes G Class, an extremely simple and quick operation, to be done only o…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos