Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sl
    4. : Car radio disassembly instructions

Mercedes Sl - Video tutorial

Model: Mercedes Sl R230 - Years 2001-2011
Part: Car stereo
Operation: Car radio disassembly instructions

To be able to disassemble the original car radio, some elements of the central console and the tunnel must be removed, starting with the clock placed right in the center of the dashboard; then unscrew the two screws below that secure the ventilation outlets and extract them by opening the plastic fixing tabs at the base of the same; then move on to the tunnel elements by removing the gear lever knob, the frame at its base, unhook the side panels of the tunnel itself and unscrew the screws below to complete the disassembly of the part of the console that houses the climate control controls; at this point it is possible to extract the food holder support and unscrew the fixing screws of the car radio.


Posted on 22 August 2023 by ScegliAuto



Remove car radio on Mercedes Sl
Mercedes Sl (1989-2001 / MK 5, R129) Do we want to replace the car radio of a Mercedes Sl? Let's take apart the car radio to replace it with a more recent one, let's see how. Insert the
How to disassemble the stock car stereo of the Mercedes SL R230
Mercedes Sl (2001-2011 / R230) Despite what one might think, the complete removal of the stock car radio of your Mercedes SL R230 is absolutely a perfectly performing maintenance o
Window microswitch removal instructions
Mercedes Sl (1989-2001 / MK 5, R129) A micro switch is located on the inner bottom of the door which controls and stops the run of the window when the glass comes into contact with it; t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos