Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mercedes A-Class

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Car door

If you need to remove the front door panel of this vehicle, you will find the instructions very simple and the steps to follow in the video and in this description. The first thing to do is locate the two screws located just below the door handle and proceed to remove them with a screwdriver. At this point, pry along the entire perimeter of the panel with a plastic trim tool to release all the clips. Then, gently pull the panel away while being careful to disconnect all the electrical connectors located behind.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Mercedes A-Class
How to Remove the Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. remove the front door panel of your Mercedes A-Class. Using a thin but sturdy tool, start by prying and removing the inserts of the door panel. Once.. …
How to Remove the Door Panel of a Mercedes A-Class
How to Remove the Door Panel of a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. sit in the driver's seat of your Mercedes A-Class. Begin by prying off and removing the door inserts using a flathead screwdriver. Once done, unscrew.. …
How to Replace the Interior Door Handle of the Mercedes A-Class
How to Replace the Interior Door Handle of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. door handle of the front door on the Mercedes A-Class. First, open the front door and start removing the door panel by unscrewing the mounting screws... …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos