Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to dismantle the mirror in a few steps

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Outside rearview mirror
Operation: How to dismantle the mirror in a few steps

It may happen that you need to replace the mirror or make a repair. In the video, it shows how to quickly disassemble the entire mirror and all its parts. To remove the cover, you need to force the mirror slightly towards the front of the car, and as shown in the video, loosen the metal part that holds it in place. Once the cover is removed, we need to release the spring that holds the mirror part.

At this point, to completely disassemble the mirror, we need to pull it towards the front of the car and unscrew the screws, starting from the bottom ones. We disconnect the connector, and the mirror frame is completely free from the car.


Posted on 17 June 2023 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos