Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Mercedes SLS AMG?

Model: Mercedes Sls MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

Video tutorial

This video shows the location of the fuse boxes and their respective diagrams for the Mercedes SLS AMG, useful if you need to check the fuse for a malfunctioning device. As shown, the first box is located inside the cabin, just behind the glove compartment on the passenger side.

The second box is located in the boot, precisely underneath the cover on the upper edge. In case of a damaged fuse, ensure you replace it with a spare of the same specifications and operate with the vehicle turned off.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to drain the engine oil of the Mercedes SLS AMG
How to drain the engine oil of the Mercedes SLS AMG
Mercedes Sls (2010-2015 / MK 1) If it is time to change the engine oil in your Mercedes SLS AMG, but you do not know how to do it, then just read the following guide carefully and f…
Oil change on a Mercedes SLS in a DIY manner.
Oil change on a Mercedes SLS in a DIY manner.
Mercedes Sls (2010-2015 / MK 1) On the Mercedes-Benz SLS AMG, the dry sump system requires an orderly sequence: bring the engine to operating temperature, stop on level ground, and …
Where are the fuses located in the Mercedes SLS?
Where are the fuses located in the Mercedes SLS?
Mercedes Sls (2010-2015 / MK 1) The fuses in the Mercedes SLS are contained within dedicated fuse boxes installed in the vehicle. In this category of cars, there are two boxes for h…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos