Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Mercedes SLS?

Model: Mercedes Sls MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

Video tutorial

The fuses in the Mercedes SLS are contained within dedicated fuse boxes installed in the vehicle. In this category of cars, there are two boxes for holding the fuses.

The first is located at the bottom of the glove compartment on the passenger side: this contains fuses for the starter motor, windscreen wipers, courtesy lights, etc. The second box is located in the side of the boot and contains fuses for the parking sensors, rear lights, etc.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on the Mercedes SLS?
Mercedes Sls (2010-2015 / MK 1) Each fuse on the Mercedes SLS is located inside one of the dedicated fuse boxes present in the vehicle: this type of vehicle has two fuse boxes. The …
What is the Fuse Diagram for the Mercedes SLS AMG?
What is the Fuse Diagram for the Mercedes SLS AMG?
Mercedes Sls (2010-2015 / MK 1) This video shows the location of the fuse boxes and their respective diagrams for the Mercedes SLS AMG, useful if you need to check the fuse for a ma…
How to drain the engine oil of the Mercedes SLS AMG
How to drain the engine oil of the Mercedes SLS AMG
Mercedes Sls (2010-2015 / MK 1) If it is time to change the engine oil in your Mercedes SLS AMG, but you do not know how to do it, then just read the following guide carefully and f…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos