Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to drain the engine oil of the Mercedes SLS AMG

Model: Mercedes Sls MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

If it is time to change the engine oil in your Mercedes SLS AMG, but you do not know how to do it, then just read the following guide carefully and follow the steps described. First of all, turn off the car completely and let it cool down enough to make sure that the engine oil is not still hot. Then lift the vehicle on a ramp or use a hydraulic jack.

At this point, locate the oil pan in the lower area and place an empty basin. Finally, remove the protective cap and let all the engine oil drain out.


Posted on 2 November 2025 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Mercedes SLS AMG?
What is the Fuse Diagram for the Mercedes SLS AMG?
Mercedes Sls (2010-2015 / MK 1) This video shows the location of the fuse boxes and their respective diagrams for the Mercedes SLS AMG, useful if you need to check the fuse for a ma…
Oil change on a Mercedes SLS in a DIY manner.
Oil change on a Mercedes SLS in a DIY manner.
Mercedes Sls (2010-2015 / MK 1) On the Mercedes-Benz SLS AMG, the dry sump system requires an orderly sequence: bring the engine to operating temperature, stop on level ground, and …
Where Are the Fuses on the Mercedes SLS?
Mercedes Sls (2010-2015 / MK 1) Each fuse on the Mercedes SLS is located inside one of the dedicated fuse boxes present in the vehicle: this type of vehicle has two fuse boxes. The …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos