Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you reset the air conditioning system of the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Air conditioning
Operation: How do you reset the air conditioning system of the Mercedes C-Class?

To perform the reset of the air conditioning system in the Mercedes C-Class, you need to turn the ignition key inside the corresponding block so that you can use the air conditioning controls located in the center of the dashboard. Here, you will be able to simultaneously press the REST button and the windshield defrost button. You must continue to hold them until the "End" message appears on the air conditioning screen. At this point, you can turn off the instrument panel and when you turn it on again, you will notice that the reset has been completed.


Posted on 2 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - What problems are there with the air conditioning in the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What ventilation problem on the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos