Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Infrared Comfort Closure on a Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Checks and maintenance

Let's see how to repair the closure on the Mercedes A-Class, which allows you to close the windows by bringing the key closer. Remove the handle by unscrewing it from the door thickness: take off the rubber cover at the handle height, and with a Torx screwdriver, enter the slot and unscrew the 20 mm screw. To remove the sensor, however, you need to drill the block with a fine-point drill. The sensor is indeed damaged, and some solder points are missing on the circuit. The YouTuber now heats the circuit to remove the protection and resolder the two points together. Once soldered, seal it with silicone, securing the solder joint, and put it back in the lock (holding it with a zip tie, since the lock stops have been removed). Clean the area and put it back in place. Job complete.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2004-2012 / W169) .. by part and repair the display on a Mercedes A-Class W169. First, remove the instrument cluster from the vehicle by disconnecting the electrical connectors.. …
Mercedes Classe A (2004-2012 / W169) .. how to activate the door lock on a Mercedes A-Class W169; this will engage when a certain speed limit is exceeded. First, enter the cabin and navigate.. …
Mercedes Classe A (2004-2012 / W169) .. and of course the oil filter, on a Mercedes A-Class W169. First, open the hood and unscrew the oil filler cap, then lift the car and secure it. Locate.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2018-2026 - What does the A1 service of a Mercedes A-class include? Read answer
    • Classe A 2018-2026 - How many km do you have to check the Mercedes A-Class every time? Read answer
    • Classe A 2012-2018 - How much does the service cost of the Mercedes Benz Class A180cdi? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos