Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on a Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Checks and maintenance

In this video, see how to replace the rear brake pads on a Mercedes A-Class W169: First, remove the rear wheels and lift the vehicle securely on jack stands (do not rely solely on your jack). There are two nuts to remove to take off the calipers: they are 13 mm and the counter nut is 15 mm. Retract the piston and remove the old pads, then clean the brackets thoroughly before installing the new pads. Apply some copper grease - specifically for brakes - to the ends before mounting them. Reinstall the caliper, tightening the nut and counter nut securely. Reattach the wheel and repeat the process on the other side.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2004-2012 / W169) Replacing the rear brake pads on your car? Let's see how to replace the rear brake pads. Lift the vehicle with a jack to the desired height, then rem…
Mercedes Classe A (2004-2012 / W169) .. disassembly procedure is valid only for the A-Class W169 and B-Class 245. First, lift the vehicle with a jack and safety stands. Now, remove the rear.. …
Mercedes Classe A (2012-2018 / W176) In order to replace the rear brake pads of the Mercedes A-Class, you need to lift the car so that the corresponding rear wheel can be removed from it…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2018-2026 - What does the A1 service of a Mercedes A-class include? Read answer
    • Classe A 2018-2026 - How many km do you have to check the Mercedes A-Class every time? Read answer
    • Classe A 2012-2018 - How much does the service cost of the Mercedes Benz Class A180cdi? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos