Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on a Mercedes A

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake pads

See other generations:
Video tutorial

Replacing the rear brake pads on your car? Let's see how to replace the rear brake pads. Lift the vehicle with a jack to the desired height, then remove the wheel with the respective bolts.

Unscrew the caliper lock bolt, remove the caliper from the wheel hub, use a screwdriver to detach the pads from the caliper, remove the brake caliper, and then the rotor. After installing the new pads, tighten all the bolts.

Reinstall the wheel after the replacement and test the operation of the rear brakes.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Reset the Brake Wear Light on a Mercedes A-Class?
How to Reset the Brake Wear Light on a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) To reset the brake wear light on a Mercedes A-Class, turn on the ignition so you can navigate through the menu that appears on the instrument cluster…
How to Replace the Rear Brake Discs and Pads on a Mercedes Benz A-Class A250 W176
How to Replace the Rear Brake Discs and Pads on a Mercedes Benz A-Class A250 W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the rear brake pads and discs on a Mercedes Benz A-Class A250 W176. The first step is to secure the vehicle and relea…
How do you replace the rear brake pads of the Mercedes A-Class?
How do you replace the rear brake pads of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) In order to replace the rear brake pads of the Mercedes A-Class, you need to lift the car so that the corresponding rear wheel can be removed from it…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos