Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads of the Mercedes Classe A, you will need to lift the car using a jack or a lift to ensure that the corresponding wheels are not in contact with the ground: once lifted, you can loosen the screws to remove the wheels and locate the corresponding brake caliper.

Once the caliper fixing screws are removed, you can detach it from the disc and use a lever to remove the pads inside; you can now insert the new pads to check that everything is working properly.


Posted on 30 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Mercedes A-Class
How to Replace the Front Brake Pads on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. you begin, lift the front of your Mercedes A-Class. Start by removing the front wheel by loosening the lug nuts. After this, remove the bolts that.. …
How do you replace the rear brake pads of the Mercedes A-Class?
How do you replace the rear brake pads of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. to replace the rear brake pads of the Mercedes A-Class, you need to lift the car so that the corresponding rear wheel can be removed from its housing... …
How to Replace the Rear Brake Pads on a Mercedes A-Class?
How to Replace the Rear Brake Pads on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To replace the rear brake pads on a Mercedes A-Class, lift the vehicle using a jack so that the corresponding wheel is off the ground. Once the vehicle.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos