Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Mercedes A-Class?

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Brake pads

To replace the rear brake pads on a Mercedes A-Class, lift the vehicle using a jack so that the corresponding wheel is off the ground. Once the vehicle is lifted, remove the wheel by unscrewing the bolts to access the brake caliper. Detach the caliper from the brake rotor by unscrewing the bolt, then slide out the old brake pads. Insert the new pads into the caliper, reposition the caliper onto the rotor, and install the corresponding wheel.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Brake Shoes of the Mercedes A-Class?
How to Remove the Rear Brake Shoes of the Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. To remove the rear brake shoes of the Mercedes A-Class, loosen the bolts that secure the wheel, completely removing it to access the brake underneath... …
How to Replace Brake Pads on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) If you want to replace the brake pads on the vehicle, proceed as follows: first, lift the car and remove the wheels, then locate the through bolts th…
How to Replace the Brake Pads on a Mercedes A-Class
How to Replace the Brake Pads on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) For this operation, you will need to lift your vehicle and place it on appropriate jack stands to remove the wheel where the replacement is necessary…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos