Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe A
  6. : How do you replace the rear brake pads of the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Brake pads
Operation: How do you replace the rear brake pads of the Mercedes A-Class?

In order to replace the rear brake pads of the Mercedes A-Class, you need to lift the car using a jack so that the corresponding wheel does not touch the ground. Then, you will be able to unscrew the bolts that secure the wheel and remove it from its hub, allowing access to the brake caliper. The caliper should be removed from the rotor by unscrewing its fixing bolts: then, you can remove the pin that holds the brake pads in place and replace them with new ones. After the replacement, you can reassemble all the components that were just disassembled.


Posted on 20 July 2023 by ScegliAuto

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos