Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses on the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Fuse box

In this video, see where some of the fuses are located on the Mercedes Sprinter MK2. Here, we only see those located under the driver's seat (the indication is also valid for left-hand drive models). In this box, you will find the fuse for the 12 Volt socket located at the base of the seat (no. #24) and the 12 Volt socket in the rear loading area on the right (no. #25). Another box is located at the bottom of the dashboard, to the left of the steering wheel, where you will find the fuse for the cigarette lighter (no. #13) and the socket in the centre console (no. #25). A pre-fuse box is also located in the battery compartment on the left side of the vehicle's floor, and another at the base of the driver's seat. In the same place, you will also find a strip containing relays.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located on the Mercedes Sprinter?
Where are the fuses located on the Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) Inside the Mercedes Sprinter, the fuses are located in the designated fuse boxes installed on the vehicle: in this type of vehicle, you can find two …
Where are the fuses located in the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The fuses in the Mercedes Sprinter are contained within two dedicated fuse boxes installed in the vehicle: in this model, the first box can be found …
Diagram and positioning of internal fuses in the Mercedes Sprinter
Diagram and positioning of internal fuses in the Mercedes Sprinter
Mercedes Sprinter (1995-2006 / MK 1, W901) In this guide we will see the instructions regarding the layout and positioning of the internal fuse box of the Mercedes Sprinter. First of all, we g…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos