Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Removal of the rear seats of the Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter Br910, MK 3, Br907 - Years 2018-2024
Part: Seat
Operation: Removal of the rear seats of the Mercedes Sprinter

Let's see in this short guide the instructions that will allow us to disassemble and replace the rear seats of the Mercedes Sprinter, in simple steps. First of all we open the side sliding doors and get on board the car; then we go to remove the plastic bulkhead that we find under the seat on the side, thus unscrewing the screws of the guides. At this point we are going to pull the lever that we find under the seat, in order to permanently remove it from the car; we just have to install the rear seat again, applying the reverse procedure!


Posted on 24 August 2022 by ScegliAuto



How do you remove the rear seats of the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In order to remove the rear seat of the Mercedes Sprinter it is necessary to loosen the screws that secure the seats in the rear part of the backrest
How do you replace the wing mirror on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In order to replace the exterior rear view mirror of the Mercedes Sprinter, the glass of the mirror must be tilted, so that it can be detached from i
Where is the fuse box on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) If you are looking for the fuse box of your Mercedes Sprinter but you are having difficulties then all you have to do is read the following guide car

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos