Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driver's Seat in a Mercedes Sprinter?

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

See other generations:
Video tutorial

To replace the driver's seat in a Mercedes Sprinter, loosen the Torx screws located at the bottom of the seat. Once these are loosened, lift the front of the seat and unscrew the bolts found on the rear hinges.

By loosening these bolts as well, the seat can be completely removed. The new seat should then be positioned and secured with the relevant bolts: these must be inserted first into the rear hinge and then into the front.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Boxes of the Mercedes Sprinter W906
Location and Diagram of the Fuse Boxes of the Mercedes Sprinter W906
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video, we will see the location of the fuse box of the Mercedes Sprinter W906: the one located inside the cabin is situated at the lower part…
Where are the fuse boxes on the Mercedes Sprinter 907?
Where are the fuse boxes on the Mercedes Sprinter 907?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) The Mercedes Sprinter in its 907 version has three fuse and relay boxes. The first box is located in a compartment described in the video: it is at t…
Where is the battery located in the Mercedes Sprinter van?
Where is the battery located in the Mercedes Sprinter van?
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video, you can see where the battery is located in the Mercedes Sprinter van and how to proceed if you need to replace it. As shown, the batt…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos