Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Replacement of the front headlight bulb of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Headlight bulb
Operation: Replacement of the front headlight bulb of the Mercedes C-Class.

As soon as we realize that a headlight bulb of the Mercedes C-Class is burnt out, we must replace it as soon as possible, both for our safety and to avoid penalties. To replace it, we open the front hood, position ourselves in front of the headlight that contains the bulb to be replaced, and on the inside of the headlight, we will find a round cap that we will open by rotating it. We disconnect the electrical connector and remove the bulb, using pliers if it resists too much. We insert the new bulb, avoiding touching the bulb with bare fingers, connect the connector, and place the protective cap back in its position.


Posted on 13 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos