Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to replace the tail light bulbs of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Rear light bulb
Operation: How to replace the tail light bulbs of the Mercedes C-Class

Shortly we will see the instructions that will allow us to disassemble and replace the rear taillight and its bulbs of the Mercedes C-Class. First, open the rear hatch of the trunk and start by releasing the two plastic tabs found on the taillight's dome; then remove the bulb holder, with its bulbs, from the headlight, as shown in the video. At this point, replace any faulty bulbs with new ones, with the same fitting; then replace the outer rear light if necessary, applying the reverse process for reassembly!


Posted on 7 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos