Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the glass of the external rearview mirror of the Mercedes E-Class

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Side mirror

The instructions in this guide will show us the process of disassembling and replacing the glass of the external rearview mirror of the Mercedes E-Class. First of all, let's move to the side and start gently detaching the mirror glass on the sides, using a lever; disconnect the small electrical connector, if present, as shown in the video. At this point, make sure that the rear hooks are in good condition, then install the new mirror glass; finally, all that's left is to adjust it using the control located inside the car!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on the Mercedes E-Class
Guide to Replacing the Timing Chain on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. for replacing the timing chain on the Mercedes E-Class; the manufacturer recommends replacing the timing chain every 137,500 miles. To access the timing.. …
How to Replace the Air Filter on a Mercedes E-Class?
How to Replace the Air Filter on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. You can replace the air filter on a Mercedes E-Class by opening the hood: this will allow you to access the components located inside the engine bay... …
How to Replace the Timing Chain on a Mercedes E-Class?
How to Replace the Timing Chain on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the timing chain on a Mercedes E-Class, you need to remove the engine from its compartment. First, disconnect all hoses and connectors.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos