Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to repair the panoramic roof of a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Bodywork
Operation: How to repair the panoramic roof of a Mercedes C-Class

In this video we can see how to repair the panoramic roof of a Mercedes car; in this case, the front part does not move, but immediately returns down: We must then remove the ceiling in order to access the track, which we can remove and replace. We can find the track for replacement online, for example on Joom. Com with the code 6569c96ab48a244ab2aa20c8 at a price of 131.01 euros for the pair right/left; including delivery costs. It is recommended to carefully check the compatibility with your car. Remove the track guides and replace them on both sides. Of course, we will have to reset everything to factory settings, and it will open correctly.


Posted on 29 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - How do you open the bonnet, for maintenance, on the Mercedes C-Class W205? Read Answer
    • Classe C 2007-2013 - How much is the trunk and tank volume of the Mercedes c220 CDI w204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos