Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on Mercedes SLK R171

Model: Mercedes Slk MK 2, R171 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel on a Mercedes SLK R171, follow these general steps. Before starting, it is important to disconnect the negative terminal of the battery for safety reasons.

There are screws along the inner edge of the door, near the lock, that need to be removed. Remove the triangular plastic cover located behind the external mirror and the one from the internal handle.

Under the cover of the internal handle, there are additional screws securing the panel that need to be unscrewed. Remove the cap that says AIRBAG and unscrew the underlying screw.

Pry along the edges of the panel to release the clips. Disconnect the cable from the internal opening handle and the connector.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Mercedes Slk (2004-2011 / MK 2, R171) In this video we can see the features of a module that allows you to control the opening and closing of the sunroof of the Mercedes SLK R171 using th…
Mercedes Slk (2004-2011 / MK 2, R171) In today's video, you will see the steps to remove and replace the front headlight bulbs on a Mercedes SLK R171, second series. First, open and lift …
Mercedes Slk (2004-2011 / MK 2, R171) This guide shows how to replace the battery in the remote for the Mercedes Benz SLK 200 R171. The first step is to remove the emergency key by pressi…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos