Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the transmission of the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Warning light – error code

These short and simple instructions will show us how to reset the automatic transmission of the Mercedes CLA. First of all, we get into the car and start the instrument panel; then we press and hold down the accelerator pedal for about ten or twenty seconds, as shown in the video. At this point, we turn off the instrument panel and continue to hold down the accelerator pedal for about two minutes; finally, we release the pedal and turn on the instrument panel again, thus completing the automatic transmission reset operation!

Posted on 17 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a Mercedes CLA
How to Reset the Tire Pressure Light on a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) These brief steps will show you how to reset the Tire Pressure Monitoring System (TPMS) light on a Mercedes CLA. Before performing the reset, ensure …
How to reset the tire pressure indicator on the Mercedes CLA
How to reset the tire pressure indicator on the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Following these brief steps, we will see how to reset the tire pressure monitoring system (TPMS) light on the Mercedes CLA; before performing the res…
How to reset the service in the Mercedes CLA?
How to reset the service in the Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) Resetting the service in the Mercedes CLA, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos