Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Mercedes S-Class

Model: Mercedes Classe S W221, MK 5 - Years 2005-2013
Part: Starter motor

Below are the main instructions that will allow us to disassemble and replace the starter motor of the Mercedes S-Class. First, open the hood of the car and start by disconnecting the battery terminals; then raise the car to locate the starter motor, unscrewing all the fixing screws and disconnecting the electrical wiring, as shown in the video. At this point, remove and replace the starter motor with the new original one, finally checking its operation, following the video tutorial to the end!

Posted on 5 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Mercedes S-Class located?
Where are the fuses of the Mercedes S-Class located?
Mercedes Classe S (1999-2005 / MK 4, W220) .. Inside the Mercedes S-Class, the fuses are located in the appropriate fuse boxes that are installed on the vehicle: in this.. …
How to Reset the Service in the Mercedes S-Class?
How to Reset the Service in the Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) .. see how to reset the service in the Mercedes S-Class, a very simple and quick operation to perform only after completing all scheduled maintenance tasks... …
How to Change the Cabin Air Filter on a Mercedes S-Class W223
How to Change the Cabin Air Filter on a Mercedes S-Class W223
Mercedes Classe S (2020-2026 / W223) .. If you own the new Mercedes S-Class W223 and want to replace the cabin air filter yourself, just follow these steps. First, purchase.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos