Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel on the Mercedes Benz C300

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door trim panel

Removing the rear door panel of a Mercedes C-Class is a very simple and quick activity to do independently. To carry out this operation, we need to open the door in question and remove the upper side of the panel with a plastic lever tool. Immediately after, we insert the same tool on the sides of the panel to remove it. Unscrew the screw behind the handle and remove the panel. Disconnect the connector and finish the procedure. To carry out the assembly, we need to connect the connector and push the panel to mount it. Screw the handle screw and mount the two upper parts.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel on a 2018 Mercedes C300
Removing the Front Door Panel on a 2018 Mercedes C300
Mercedes Classe C (2014-2021 / W205) In today's video, you will learn how to remove the front door panel on a 2018 Mercedes Benz C300 by following these simple steps. First, open the fro…
Removing Door Panel on Mercedes C-Class
Removing Door Panel on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) In this video tutorial, you will learn how to remove the door panel from a Mercedes C300. First, open the door and unscrew the screws located under t…
How to replace the windshield wipers of the Mercedes C300
How to replace the windshield wipers of the Mercedes C300
Mercedes Classe C (2014-2021 / W205) In this new guide dedicated to all of you who own a Mercedes C300 (also called W205), we will explain the steps to follow if you intend to replace bo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos