Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Mini Cooper?

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Service warning light

The Service indicator that appears on the instrument panel of the Mini Cooper can be reset by turning on the car's instrument panel, so that you can navigate within the menu that will appear on the display. Here you will need to hold down both buttons located on the side of the speedometer until the Service indicator with the maintenance interval that has been reset appears again on the instrument panel. You will then be able to verify that the Service indicator has completely disappeared from the instrument panel and that the car's maintenance interval has been reset to zero.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) The service light reset on a Mini Cooper vehicle follows simple and quick steps to be carried out independently. To reset the service light related t…
How to reset the Service light on the Mini Cooper S?
How to reset the Service light on the Mini Cooper S?
Mini (2007-2014 / R56, R57, R55) From the Mini Cooper S instrument cluster, you can completely turn off the Service light by switching on the vehicle's ignition, allowing you to navi…
How do you reset the Service light on the Mini Cooper?
How do you reset the Service light on the Mini Cooper?
Mini (2023-2026 / F66) To reset the Service light on the Mini Cooper, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slo…

How to Replace the Air Control Knob Bulbs in a Peugeot 207

How to replace the bulbs for the air conditioning control knobs in a Peugeot 207? In this video, see how to proceed. Remove the side trim plastics using a plastic lever; disconnect the locking levers of the air conditioning controls with a screwdriver (levering them out), then remove the parts from the instrument panel (as shown in the video). Be careful not to break the plastic tabs that secure the frames. After removing the knobs from the panel, replace the bulbs or LEDs with new ones (remove the onboard computer if replacing the LEDs). Finally, reassemble all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos