Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change indicator on a Mini

Model: Mini Mini Countryman2, F60 - Years 2017-2023
Part: Service warning light

In this video, we see how to reset the oil change indicator light on a 2021 Mini Cooper: after getting into the car and making sure all doors, the trunk, and the hood are closed, we turn on the ignition and press and hold the button located above the instrument panel cover, on the left. Then we will need to release it and hold it down a few times, while on the display we will see that the reset is in progress: "reset in progress". In the end, the message will disappear and the one saying that the reset has been successfully completed will appear. We can turn off the ignition.

Posted on 23 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on a 2009 Mini Cooper.
How to reset the oil light on a 2009 Mini Cooper.
Mini (2007-2014 / R56, R57, R55) Resetting the oil change indicator on a 2009 Mini Cooper vehicle is a very simple operation that can be done independently, thanks to our short video…
How to Reset Oil Service Indicator on Mini Countryman
How to Reset Oil Service Indicator on Mini Countryman
Mini (2010-2016 / Countryman1, R60) In this video, learn how to reset the oil service maintenance indicator on the Mini Countryman. This is a very simple operation. Enter the vehicle, t…
To reset the service indicator light on the Mini Countryman.
Mini (2017-2023 / Countryman2, F60) In this short guide, we will see the necessary steps on how to reset the maintenance indicator light for the oil change of the Mini Countryman. First…

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos