Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Mini key battery

Model: Mini Mini Various
Part: Key

Thanks to this very useful tutorial, we can see how to replace the battery (CR2025) of the keyless key of a MINI vehicle (Clubman, Countryman, Paceman, etc.) in a few simple steps. Let's see how to do it right away. We start the procedure by removing the physical key from the remote by pressing the appropriate unlock button, then we take a small screwdriver with a flat tip and lever off the back cover of the remote. After that, we take the physical key extracted at the beginning of the procedure to help us remove the battery cover as shown in the video, finally we remove the old battery and replace it with a new one, then close everything following the reverse procedure.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mini F54 Clubman
How to replace the battery of the Mini F54 Clubman
Mini Mini Various In this video we will show you how to replace the battery of the Mini F54 Clubman. Open the engine hood and locate the battery located to the right. …
How to reset the tire pressure warning light in a Mini?
How to reset the tire pressure warning light in a Mini?
Mini Mini Various In this tutorial we can see how to reset the tire pressure warning light in a Mini, an extremely simple and quick operation, to be carried out only o…
How do you reset the service light on the 2013 Mini Countryman?
How do you reset the service light on the 2013 Mini Countryman?
Mini Mini Various How do you reset the service light on the 2013 Mini Countryman? In order to reset the service warning light on our 2013 Mini Countryman it is necessa…

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos