Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the Union Jack headlights on the Mini F56

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023
Part: Tail light

In this article we will show you how to replace the rear light by installing the union jack light on the Mini Cooper F56. For this procedure you will need a Torx T10 key and the appropriate tool for plastic, in some cases it is sent together with the light. To install the new light, you must first use the appropriate tool for plastic to lever on the side of the light frame to remove it, once the frame is removed you will have access to the 3 Torx screws, using the appropriate screwdriver remove them and then extract the light, once the light is extracted remove the connector. At this point you can replace the light by installing the new light, connect the connector, insert the light into its housing and screw the 3 Torx screws, once the screws are screwed in, insert the frame by pressing with your hands to insert the fixing clips.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to have the rear lights of your Mini with the Union Jack
How to have the rear lights of your Mini with the Union Jack
Mini (2017-2023 / F60, Countryman2) The rear lights of the Mini with the Union Jack are really a must. But installing them in the aftermarket is very expensive: The pair of headlights o…
How to install the rear light system in a Mini f56
How to install the rear light system in a Mini f56
Mini (2014-2023 / F55, F56, F57, F54) In this video we will see how to install new taillights for a Mini F56. As a first step, use a rod to act as a pivot to the plastic mask of the light…
How do you replace the battery in the remote control of the Mini F56?
How do you replace the battery in the remote control of the Mini F56?
Mini (2014-2023 / F55, F56, F57, F54) In order to replace the battery in the Mini F56 remote control, you need to remove the key from inside its housing and then you will need to pry the …

Other guides you may be interested in

How to Reset the Tyre Pressure Indicator on a Jeep Wrangler

This procedure does not require any special tools or skills. After starting your vehicle and noticing the indicator on the dashboard display, simply open the driver's side door to get the correct pressure settings for both front and rear tyres. Inflate your tyres to the indicated pressures, then restart the vehicle's onboard computer. If the indicator continues to flash, contact a specialist to check the relevant sensor.

Watch the video!


by ScegliAuto

More videos