Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Controls for Headlights, Main Beam, and Fog Lights on a Mini Cooper

Model: Mini Mini F55, F54, F56, F57 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight

See other generations:
Video tutorial

The light controls on the Mini Cooper are located on the left stalk behind the steering wheel. On the head of the stalk, there is a dial: "0" for all off; 1 notch: position lights; 2 notches for dipped beam.

To activate the main beam, push the entire stalk forward (towards the dashboard): a blue warning light will illuminate on the dashboard. To turn them off, pull the stalk towards you. To "flash" the lights, pull the stalk briefly towards you (used for signalling).

The fog light button is usually located on the central console or below the climate control, not on the stalk. In the video, the model has a toggle switch at the bottom of the dashboard.

The rear fog light is the only one required by law. When activated, an orange warning light will illuminate on the dashboard.


Posted on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Fog Lights on the Mini Cooper
How to Replace the Rear Fog Lights on the Mini Cooper
Mini (2007-2014 / R57, R56, R55) To replace the rear fog lights on the Mini Cooper, follow these steps: 1) Disconnect the battery. 2) Gently pry the red side tabs, being careful not …
How to Turn on the Fog Lights on a Mini Cooper
How to Turn on the Fog Lights on a Mini Cooper
Mini (2014-2023 / F55, F54, F56, F57) Let's see how to turn on the fog lights on a Mini Cooper. First, ensure that the headlight selector is set to either automatic or dipped beam. To tur…
How to Replace the Fog Light Bulb on a Mini Cooper
How to Replace the Fog Light Bulb on a Mini Cooper
Mini (2010-2016 / R60, Countryman1) Replacing the fog light bulbs promptly is very important as it reduces potential inconveniences and dangers while driving in heavy fog. Below, you wi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos