Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the rear taillight of the Mini Cooper

Model: Mini Mini F55, F54, F56, F57 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the rear taillight of the Mini Cooper. First of all, we open the rear hatch of the trunk and start removing the chrome plastic cover located around the taillight; then we unscrew the side fixing screws to detach and remove it, disconnecting the electrical connector of the lights, as shown in the video.

At this point, if necessary, we replace the entire rear taillight or its bulbs, installing and connecting the new headlight; finally, we verify the correct functioning of the stop lights.


Posted on 8 August 2025 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) If you need to remove one of the rear headlamps from your Mini Cooper R56 but don't know how, don't worry as we will explain step by step how to comp…
Mini (2001-2007 / R53, R50, R52) In this brief guide, see the instructions that will allow you to dismantle and replace the panel of the tailgate of the Mini Cooper's boot. First, op…
Mini (2007-2014 / R57, R56, R55) Good morning, today’s goal is to replace the key battery on our Mini Cooper. Start by prying off and removing the back cover of the key using a thin …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos